Archive for the ‘Drywall’ Category

The Proper Way to Paint Your Drywall

In today’s world, it seems that almost any topic is open for debate. While I was gathering facts for this article, I was quite surprised to find some of the issues I thought were settled are actually still being openly discussed.

Before you consider painting your drywall, you have to remember that this is a fairly specialized task. However, if you have the proper equipments or tools and do the necessary preparations, you will find that it can be achieved by nearly everyone.

When painting drywall, you have to know about the step-by-step process in doing it properly. If you neglect to do at least one of the processes, you will end up with a painting job that looks quite amateurish.

The first step in painting drywalls is by making sure that the weather is not too humid and it should be fairly warm. You also have to make sure that the surface or the drywall you are planning to pain is dry, free from oil and grease, and that it is completely clean.

You also have to apply 3 coats of joint compound on the drywall and the joints between the panels should be taped with fiberglass or paper mesh tape or drywall tape. By doing this, you will ensure that the joint gets surfaced over. You also have to make sure that you fill in any cracks or marks using the same method.

I trust that what you’ve read so far has been informative. The following section should go a long way toward clearing up any uncertainty that may remain.

You also have to clean the walls and ceilings that you intend on painting by wiping off the dust. Do this before priming. After the prime coat has dried, the next step is to sand the surface lightly with a fine grit sandpaper. This will enable you to smooth any imperfections, and raised fibers as well as rough chips. Always keep in mind that you need to wear goggles and mask as the gypsum dust produced when sanding drywalls can be very irritating to the eyes and is known to cause breathing problems.

You should also take care in removing dust from the top of your doorway as well as in the window trims. You also have to use drop cloths in order to protect finished flooring as well as doors, windows, and other fixtures. It is highly recommended that you use a painter?s plastic to do this.

You need to keep in mind that after you taped the drywall and sanded it, you shouldn?t allow the drywall to sit too long. The sunlight can cause the drywall to yellow and fade. In fact, it can look uneven even after painting it. Use a good quality latex stain-killing paint before you prime it in order to fight the yellowing process.

Two coats of paint should be enough. On the first coat, use a low sheen, latex flat wall paint. This should be tinted to match the color of the top coat. For the top coat, use two coatings of gloss paint, which includes eggshell and satin paint. This will leave you with a finish that is easy to wash and one that is not prone to smudges and marks. For the roof, flat paint is a good option.

Always remember that with the proper equipments and preparation, you will be able to have a professional looking finish when painting your drywall.

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

The Drywall: Tips to Properly Install Your Drywall

The following article presents the very latest information on Drywall. If you have a particular interest in Drywall, then this informative article is required reading.

First of all, drywall is basically a popular term for prefabricated plaster wall panels. These panels are usually very easy to install but you need to remember that you have to do it properly in order for you to avoid encountering problems that can lead to costly and time consuming repair.

This is why you have to know how to avoid the common mistakes that is usually associated in installing drywalls. This will help in saving yourself the headache of redoing the entire job all over again, which can be very costly and can really lead you to have a very big headache.

So, here are some tips that will enable you to avoid the common mistakes in installing drywall and save a lot of time and money on repairs.

The first tip will concern the surface on which you will install the drywall on. The walls should be flat and the framing should be straight at right angles. You also have to remember that the studs or rafters that are bowed should be planed first in order to flatten them before you work on them.

To test if the wall is flat and straight, get a piece of string and stretch it across the walls in order to make sure that the studs are all on the same plane. If it is not, plane it again and check again.

It seems like new information is discovered about something every day. And the topic of Drywall is no exception. Keep reading to get more fresh news about Drywall.

When cutting the prefabricated plaster wall panels or drywalls, you will find that it is very simple to do as it doesn?t involve any sawing in order to separate it. You also don?t need to cut all the way through the drywall. Doing so will only result to a prematurely-dull utility knife and a scratched surface underneath.

The proper way to cut drywalls is by drawing a line across the panel. Make sure that the line you draw is completely straight. This can be achieved by using a drywall T-square. Then, you have to score down this line just deep enough to cut through the backing paper. After doing this, all you need to do is lift the panel and snap it right down the line or the guide. To complete the cut, you can then slice through the remaining layer of backing paper and you have to smoothen any rough edges.

You also have to keep in mind that it is very common for people to go overboard when they apply the joint compound or the mud when it comes to taping or mudding the drywall. Always keep in mind that you should never work the joint too much and at a very early stage.

A great way to do this is by first applying the tape and spread a thin layer of compound over the tape to embed it. Then, you have to leave it to dry before you scrape it slightly to level any high spots. You can apply a second layer if it is necessary or if the first layer isn?t enough.

These are the proper ways on how you can properly install drywalls on your home. By following these tips, you can be sure that you will be able to avoid costly mistakes in drywall repair.

Hopefully the sections above have contributed to your understanding of Drywall. Share your new understanding about Drywall with others. They’ll thank you for it.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO Hosting

How to Repair Popped Nails in Your Drywall

When installing drywalls today, you will see that most people use screws. However, there are still quite a lot of people who install drywalls using nails. This can work but the problem with nails is that it is known to become loose and pop out through the surface.

Popped out nails aren?t only unpleasing to look at but it can also be dangerous, and can cause injuries. This is why you have to get popped out nails. In some cases, you will find popped nails around the edge of ceilings and also on external walls. These spots are where extreme temperatures can directly affect the wood and the metal. You have to consider the fact that extreme temperatures have different effects on wood and metal. It can cause the heads of the nails to get a small amount of condensation, which can lead to rust, which will discolor the attached spackling. It will also discolor the drywall material, which you really don?t want to happen.

The rust can even get the material on the head of the nail to fall of entirely.

There are also cases where nails may pop if the house has settled somewhat over time. If you do suspect that your home has settled too much or too quickly, it is very important for you to contact your local home inspector as this can mean structural damage to your home. If structural damage is present, it is important for you to get this fixed first before you concern yourself with the cosmetic issues of popped nails on your drywall.

The best time to learn about Drywall is before you’re in the thick of things. Wise readers will keep reading to earn some valuable Drywall experience while it’s still free.

You have to remember that you cannot fix a popped nail by just tapping it in back in the wood. You have to remember that the nail hole will be slightly oversize and this cannot be fixed. If you just tap the nail back in, it will move again later and get popped out again. The key to repairing popped nails on your drywall is to find a way to hold the nail securely and one of the simplest and most effective as well as popular ways to do this is by using another nail.

When driving your new nail in to the wood behind, you first need to drive a drywall nail next to the popped nail. This will get the new nail?s head overlap the top of the old one or the popped one. After doing this, you can now drive the nails to a slight dimple. You can test that the nails are already driven far enough by using a metal putty knife and dragging it across the nail. If you feel that the nail heads are dragging, you can simply drive them in a bit more.

The next step is to fill the dimple you made on the wall. You can use color changing fillers. The bright pink ones are very popular as it changes to white when it dries. Through these steps, you will be able to finish the jobs in two or three coats. You should remember to give it a slight sanding between applications.

These are the things that you should remember when repairing popped nails in your drywall. With these tips, you will be able to repair popped nails in your drywall and give a professional looking finish.

Take time to consider the points presented above. What you learn may help you overcome your hesitation to take action.

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

Drywall Finishing: Great Tips to Help You Properly Finish Your Drywall

For a lot of do-it-yourselfers, hanging drywall is considered to be almost an art. If you ask any professionals about it, they will tell you that it takes years of practice before you do a perfect job. There are so many techniques that you need to learn as installing drywalls is not as simple as hammering it in place.

So, here are some of the tips that you have to keep in mind in order for you to properly install drywall in your home.

Firstly, you need to make sure that like on any project, you have to have all the things you need before you even attempt on starting the project.

The first tip that you need to keep in mind is to have a taping knife spreader. You will also need an application knife, joint compound, joint tape, and bread pan as well as a corner taping tool. These are the basic tools you need in order for you to install drywall properly.

Whenever you are installing drywalls, you have to make sure that all of your measurements are accurate. This can take some time to practice but once you get the hang of it, you will be able to get the panels installed tightly together and install it securely. Besides, nothing is more embarrassing to have the drywall you installed to fall down on while you have guests at home.

It’s really a good idea to probe a little deeper into the subject of Drywall. What you learn may give you the confidence you need to venture into new areas.

This is why you need to remember that the nails or screws you use should be long enough in order to keep the panels secured. The most important thing about installing drywall is that you have to feel secure about your project as they are secured on its foundation.

Another tip is that you have to strive for consistency whenever you are mixing your cement or your drywall mud. The mix should resemble an icing on cake and it should not be too stiff or too loose. To test its consistency, grab a trowel and scoop some mud with it. Hold it upside down and the cement or the mud should not fall down. And at the same time, the cement or mud should be easy to apply in to the drywall.

Instead of using paper tape, use mesh tape. Because this kind of tape is porous, it will allow the cement to seep through. This will provide you with a much smoother finish than by using paper tape, which is sometimes visually apparent.

For walls, you have to try and use more adhesives and less nails. The nails should only be used at the edge of drywall panels and for the rest of the drywall panels, use adhesives to hold it in place.

In order to hide the heads of the nails, try to hammer them down just below the surface. This will some time to perfect as you don?t want the nail heads to show but you also don?t want to hammer the nail in too hard that it can break the surface of the drywall.

These are basically the ways on how you can finish your drywall properly. By following these tips, you will be able to get a drywall finish that looks as if a professional did it. It may take some time to perfect but you will eventually get the hang of installing and finishing drywalls.

Is there really any information about Drywall that is nonessential? We all see things from different angles, so something relatively insignificant to one may be crucial to another.

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

How and Why Should You Remove Drywall Mold

The best course of action to take sometimes isn’t clear until you’ve listed and considered your alternatives. The following paragraphs should help clue you in to what the experts think is significant.

Have you ever noticed that your drywall have these black spots growing? You know that this is mold and you know how ugly it is but do you know that it is important that you get it removed?

Removing the black mold from your drywall should not only be done for aesthetic purposes. You have to keep in mind that this black mold can create a very serious problem in your home, especially to your health.

Although all kinds of molds should be removed immediately, it is not quite as harmful as the black mold. If you suspect that black mold has infected your drywall, you need to get it removed immediately as drywall mold is a matter that you should take seriously. Why?

For starters, you need to remember that drywall molds or black molds are poisonous to the body. Breathing in the stuff can create a plethora of problems, which include respiratory problems, bleeding of the lungs, nausea, dizziness, headaches, and other serious health problems. This is why you should invest on eye goggles, respirator mask, and a pair of gloves before you start to attempt removing the mold from your home. Always remember that if you are going to remove black mold or drywall mold, you have to protect yourself first.

It seems like new information is discovered about something every day. And the topic of Drywall is no exception. Keep reading to get more fresh news about Drywall.

You also have to keep in mind that you cannot save the spot on your drywall where the mold has thrived or grew. Why? For starters, drywalls cannot be penetrated below the surface. This means that the mold that has developed below the surface of the drywall cannot be removed. Disinfecting it alone is not enough in order for you to really kill the mold. This means that you have to cut the area out using a utility knife. After removing the area, you have to put the infected patch of the drywall in a trash bag and seal it tight.

However, before you start removing the mold, make sure that the contaminated room is sealed off. Use a plastic sheet and a duct tape to seal off the room where the mold is and you can continue on with your work.

The next step is to clean the surrounding areas where you removed the mold using a light touch of product that is specifically made for removing molds. Some people may recommend using bleach or a bleach solution but this particular product will not be able to penetrate below the surface of the drywall. So, get a solution or a product that is specifically designed to remove mold and kill fungi.

Before you start repairing the hole in your drywall, wait for it to completely dry. If it?s one thing that you don?t want to happen, it?s fixing a wet surface and getting the mold to re-grow on it again.

Lastly, if you encounter a large area that is infected with mold, you may want to try and hire a professional to get it removed and the wall should be replaced. These are the reasons why you should remove drywall mold from your home and also how to do it properly.

About the Author
By Kenneth Allan Crosby jr,feel free to visit his top ranked recycling site: recycling, tips, history

Get Excellent Results When Finishing Your Drywall

The following article presents the very latest information on Drywall. If you have a particular interest in Drywall, then this informative article is required reading.

We all want to have a better looking interior in our homes. This is why we spend a lot of money in finishing our drywalls. In fact, some people even hire interior decorators and designers to finish drywalls. This can prove to be very costly and if you want to save money, you can try doing the project yourself.

Before you attempt this kind of project, you have to remember that finishing drywall is a craft that requires a lot of skill. This kind of skill can take years to master and perfect but if you are a serious do-it-yourselfer, you will find that you will be able to do a great job with excellent results.

When embarking on this kind of project, you have to keep in mind that you have to have all the proper tools in order for you to avoid making mistakes as you work in finishing your drywall. Besides, there?s nothing more frustrating to find out you are missing some tools when you are halfway done with your work.

You will need good quality tools to work with. It is highly recommended that you should never start on any drywall finishing projects if you don?t have quality tools with you. For starters, you may want to get different drywall knives in various sizes. Each particular knife will work better in certain places and situations. But, if you are not a professional drywall finisher, you wouldn?t want to purchase all these knives. It is recommended that you get at least three different drywall knives.

If you are going to apply drywall tape, it is recommended that you use 3?, 4?, and 6? knife. Go for the one that you are most comfortable with and you have to remember that you need to choose accordingly.

The best time to learn about Drywall is before you’re in the thick of things. Wise readers will keep reading to earn some valuable Drywall experience while it’s still free.

For bedding the tape down or applying a second application, you may want to use a 10? or 12? knife. For the final float or application, you should get a 12? or even a 14? knife to get the job done.

Stainless steel knives are great but they can be stiff and harder to work with. Blue steel knives are great because they are more flexible, which will make it easier for you to work with than with the stainless steel blades. The only problem with the blue steel knives is that they are prone to rusting when you leave it in water for too long.

The proper tools are essential if you want to have excellent results when finishing drywall. Always keep in mind that drywall finishing requires a lot of skills. You have to be patient and you need to have the proper tools to work with.

By having the proper tools, you can be sure that you will be able to get the best results possible when finishing your drywall. Today, you will be able to find all the tools you need for drywall finishing in almost any hardware or hobby stores. Just remember that cheap doesn?t always mean good.

Go for tools that are known to provide great quality and tools that will be able to get the job done efficiently and give you near-perfect results.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO Hosting

Drywall Water Damage: Helpful and Effective Ways to Repair Your Drywall

We have to admit the fact that we spend a lot of money in order to make the interior of our home beautiful. In fact, getting drywall installed alone can cost you hundreds of dollars not to mention the fact that you get it finished and textured, which will eventually make you spend more money. This is why water damage on drywall can be a very serious problem.

If you have a drywall that is water damaged, then there is a great chance that it happened because of leak from the pipes or also because of flooding. It can also be caused by leaks on your roof where rain water enters your home and eventually make its way to the drywall.

The good news is that drywall water damage is easy to repair. So, just how do you do it?

The first thing that you have to do is to determine where the leak is coming from. You have to remember that when fixing a water damaged drywall, you have to first fix the problem that caused it in the first place. In this case, you have to look for the source of the leak which caused the water damage on your drywall.

You have to keep in mind that nothing is more frustrating than getting the drywall fixed only to have the leak return and damage your newly fixed drywall again.

Hopefully the information presented so far has been applicable. You might also want to consider the following:

Now that you fixed the leak, the next step is to cut a hole in to the wet drywall in order to begin air circulation. This can be done with the help of a strong fan and it is also highly recommended that you use a dehumidifier in order to reduce moisture content on the air inside the room where the water damaged drywall is located.

It is very important that you should monitor the drying process closely in order for you to make sure that the drying process is complete. By not completing the drying process properly, you will end up growing mold on the wall within 24 to 48 hours. If this happens, get a mold restoration professional to help in removing the mold. It is crucial that you should not touch the mold as touching it can only lead to the fast spreading of the mold around your home.

Now, after everything is already dry, you can now replace the drywall and any studs that were water damaged. You may need to get a plywood backer if you cut a large hole in order to secure the drywall you mount to cover the hole.

Nail in the patch of water resistant drywall to the backer board and place joint compound over the joints. Allow it to dry and then sand the joint compound for a smooth finish.

After that, you can now tape the joint with the drywall tape where the drywall comes together with the existing wall. Once the edges are smooth, it?s time for you to paint the area in order to match the color to the rest of the wall.

These are basically how you can fix a water damaged drywall. By following these tips, you will be able to repair water damaged drywall in your home and also do so with a professional looking finish.

Sometimes it’s tough to sort out all the details related to this subject, but I’m positive you’ll have no trouble making sense of the information presented above.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO Hosting

The Basics Techniques of Installing Drywall Panels in Your Home

Do you ever feel like you know just enough about Drywall to be dangerous? Let’s see if we can fill in some of the gaps with the latest info from Drywall experts.

First of all, you need to remember that installing drywall panels as walls or ceilings for your home is not that hard to do. However, this is only half the battle. You still have to know about taping and applying compound on to the drywall you installed. This is very important as this will adjust the finished product that you will be left with.

When it comes to drywall installation, knowing how to correctly apply the mud is very important.

So, here are some things that you have to remember when you are going to start applying mud on to your drywall.

The first thing that you have to keep in mind is that you have to know about the compounds and tools.

Like in any do it yourself projects, preparation is the key in order for you to become successful. You need to be patient in order for you to get used to the tools and the equipments that is often used when installing and mudding drywalls. By being patient, you will be able to learn the different techniques that you will be using when installing and finishing drywalls. And, with patience, you will end up with a great looking final product.

You need to keep in mind that there are basically two types of jointing compound. The first is the powder and there are also pre-mixed compounds that you can use. You will find that different compounds are available in different textures. Taping compounds are coarser and commonly used after taping. Topping compounds are finer and this is used for producing a smooth wall. This is basically used for finishing. There are also all purpose compounds which can be used to do the entire job.

Hopefully the information presented so far has been applicable. You might also want to consider the following:

To apply the drywall mud on to the drywall, you will need to use taping knives. The knives are available in different lengths and sizes, which will be able to accommodate your needs when it comes to applying mud.

You need to remember that before you apply the compound, you need to make sure that all the nails and screws are sunk just below the surface of the drywall. This is to ensure that they don?t stick out. You can check if this is done properly by running a knife along the seams. If it hits any nails or screws, then you have to tap the nail or screw in the screws a little deeper.

There are four basic steps to apply mud on to the drywall. Each of the steps will require an entire day to finish, which basically means that you will get the job done in four days.

The first step is to apply the first layer, which is the taping later. You first apply the compound and then tape over the joints by using jointing tape. After this, you can apply another thin layer of compound. After this stage, you will be left with a level surface without any holes.

Next, you have to apply the other two layers of compound. These two layers are done in order to make the texture of the wall smoother. For this, you will need to use a longer taping knife than the previous steps.

The final coat is the finishing coat of compound. This will make the walls very smooth. Always remember that you need at least a day to get the compound to dry off. Because you will need to do four layers of compound, it will take you 4 days to finish the entire project. So, be patient about it and it will definitely pay off.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO Hosting

Techniques to Properly Finish Drywalls

Are you looking for some inside information on Drywall? Here’s an up-to-date report from Drywall experts who should know.

If you ask anyone who installs drywalls professionally, they will tell you that installing it is almost an art. You have to remember that installing drywalls is not as simple as hammering nails in it in order to install it. It?s much more complicated than that and it will take you years before you actually perfect the process of installing drywalls and really get a great and professionally looking finish.

As a do it yourselfer, you need to keep in mind that installing drywalls can be done even without extensive experience. It?s not that hard but there are some things that you have to know about the process in order for you to do it without making lots of costly mistakes.

The first thing that you have to keep in mind is to have everything that you need before you start. You have to have the tools and equipments that you need before you start installing the drywall. For this kind of project, you will need several things, such as joint compound, hand knife spreader, joint tape, application knife, and bread pan. You will also need a corner taping tool.

Once you have the tools that you need, you are now ready to start installing your drywall.

Another tip that you have to keep in mind is that the drywall demands precise measurement. You also need to make sure that every panel you install is tightly secured to the supports or the foundations that it is nailed to. Besides, there is nothing more embarrassing to have your newly installed drywalls fall down all of a sudden when you are entertaining visitors around your home.

Truthfully, the only difference between you and Drywall experts is time. If you’ll invest a little more time in reading, you’ll be that much nearer to expert status when it comes to Drywall.

You also have to remember that the nails you use should be long enough in order to keep the panels secured on their supports. You can also use screws if you want or you can use them in conjunction with the nails to provide more support.

When installing drywall, you have to remember that mixing the cement or mud to the right consistency is essential. The consistency of the mix should be like icing on a cake and it shouldn?t be too stiff or too loose. To check for its consistency, scoop up some drywall mud with a trowel and hold the trowel upside down. The mud should not fall down when you do this. And, when applying the cement or mud in to the drywall joints, it shouldn?t take too much effort or you should be able to do this easily.

You also have to remember that when you are on the process of mixing the mud, do not whip the cement. The whipping action will attract air in to the mud, which can form bubbles when you apply it in the drywall seams.

Another great tip that you may want to remember when it comes to finishing drywalls is to use mesh tape instead of paper tape. Because of the fact that mesh tape is porous, it will be able to provide you with a much smoother finish after applying the mud or cement.

Remember these tips and you can be sure that you will have a professional looking finish whenever you install drywalls in your home.

About the Author
By Kenneth Allan Crosby jr,feel free to visit his top ranked recycling site: recycling, tips, history

Effective Ways to Fix a Water Damaged Drywall

Have you ever wondered if what you know about Drywall is accurate? Consider the following paragraphs and compare what you know to the latest info on Drywall.

Water damaged drywall can be a very serious problem. Not only that it will make the drywall look ugly, but it can also weaken it and develop molds, which can cause serious health problems. If you have a water damaged drywall, then it is very likely that you have leaks in your home caused by flooding or piping leaks. It can also be caused by leaks on your roof.

It is very important that you get this kind of problem repaired immediately. So, just what can you do in order for you to fix water-damaged drywall?

First of all, you have to remember that you need to know where the leak is coming from. You have to make sure that you fix the leak first before you continue on in fixing the drywall. Besides, nothing can be more frustrating than having the drywall fixed only to get it water damaged again by the same leak.

You have to keep in mind that in most cases, the leak will not really come from the wall but it can come from the ceiling where the water can travel down to the damaged part of the wall. So, try to look closely for clues as to where the water came from and get the leak fixed first before you continue on with the repairs for the water damaged drywall.

The more authentic information about Drywall you know, the more likely people are to consider you a Drywall expert. Read on for even more Drywall facts that you can share.

After getting the leak repaired, the next step is to cut a hole in to the wet drywall. This will be able to get air to circulate inside the wall and dry it thoroughly. You can use a strong fan to help with the circulation as well as a dehumidifier in order to reduce the moisture content inside the wall and room where the water damaged drywall is located.

You have to keep in mind that it is very important for you to monitor the drying process closely. If you don?t let the drying process complete properly, then mold may begin to develop in as little as 24 to 48 hours. This can make your project more difficult to do as molds can be very difficult to remove and you will need a mold restoration professional for this kind of job.

After the wall is dry and you are absolutely sure that there are no more leaks, you can now replace the drywall and damaged studs. For larger holes, you can use plywood for backers. The next step is to place the patch of water resistant drywall on to the backer board. Then, you will need to place joint compound over the joints and allow it to dry. After it dries, you can sand the joint down for a smooth finish.

The last step is to tape the joint where the drywall comes together with the existing wall. For this, you will want to use a drywall tape. After the edges are already smooth and dry, you can now paint it in order for it to match the entire wall.

With these tips, you will be able to easily repair water damaged drywall. With patience and the proper techniques, you will be able to get rid of water damaged drywall with professional results that will make it look as if the damage wasn?t even there.

That’s how things stand right now. Keep in mind that any subject can change over time, so be sure you keep up with the latest news.

About the Author
By Kenneth Allan Crosby jr,feel free to visit his top ranked recycling site: recycling, tips, history




Search



Categories